- Resistor: 0.1ω-50Mω *Capacitor: 25pF-100000uF *Inductance: 0.01mH – 20H *Working power: DV-9V *Standby current: 0.02uA
- Operating current: 25mA *Dimension:105*87*28.6 mm / 4.13*3.43*1.13 inch(Approx) *Color: As pictures show *Weight: 68g
- Warm tips: Before measuring capacitance, the capacitor must be discharged , otherwise very likely damage the meter.
- Auto power off function to avoid unnecessary waste, saving battery power, improved battery life. *One tester save all measuring solutions. *Power by DC 9V or 9V battery (Battery NOT inlcuded).
- Package Content: 1*ESR Meter
Product description
Features:
- This tester can measure transistor, MOSFET, diode, resistor, capacitor, inductor and also the ESR of the capacitor. *Add boot voltage detection function.
- Automatically detect NPN, PNP bipolar transistors , N -channel and P -channel MOS FET, JFET , diodes , two diodes, thyristors small power unidirectional and bidirectional thyristor.
- Automatic test out the pin element and displayed on the LCD.
- Can be detected to determine the transistor emitter forward bias voltage of the transistor, MOSFET protection diode and the amplification factor of the base.
- Measure the gate threshold voltage and gate capacitance of the MOSFET.
- 1602 lcd display uses LCD (12864 LCD with backlight).
- High test speed, valid component test: 2 seconds (except in the larger capacitor of large capacitance measurement also takes a long time, the measured time of one minute is normal).
- One -button operation, automatic shutdown.
- Only 20nA shutdown current.
Reviews
There are no reviews yet.