Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller with Safety Switch and Buzzer 4G SD and I2C Splitter Expand Module

• -Advanced 32 little CortexM4 ARM high-performance processor, can run RTOS NuttX real-time operating system;
• -Integrated backup power supply and backup controller failure, the main controller can be connected securely to backup control;
• -Provide redundant power input and transfer failure function;
• -14 * PWM / output actuator;
• – Bus interface (UART, I2C, SPI, CAN);
  -Provide automatic and manual mode;
• -Color LED lamp;
• -Tom Multi doorbell interface;
• -Micro SD to record flight data;

Specification: 

• The board integrates with PX4FMU + PX4IO
• Pixhawk is with new 32 bit chip and sensor technology

Processor:

• 32 bit 2 m flash memory STM32F427 Cortex M4, with floating-point hardware processing unit
• Main frequency: 256 k, 168 mhz RAM
• 32 bit STM32F103 co backup processor

Sensor: 

• L3GD20 3 16 bit digital axis gyroscope
• LSM303D 3 axis 14 bit accelerometer / magnetometer
• MPU6000 6 accelerometer shaft / magnetometer
• MS5611 high precision barometer

Interface: 

• 5 * UART, 1 * High-voltage compatible, 2 * Hardware flow control
• 2 * CAN
• Spektrum DSM / DSM2 / DSM-X satellite receiver input compatible
• Input and output SBUS Futaba compatible RSSI
• PPM signal input
• (PWM or input voltage)
• I2C
• SPI
• 3.3 and 6.6 input VADC
• MICRO external USB interface
• Color: Black
• Size: 50x81x16mm / 2.0×3.2×0.6 in
• Package Size: 110x145x18mm / 4.3×5.7×0.7 in
• Weight: 48g
• Package Weight: 52g

Package Included

• 1×2 Pixhawk .4.8 main control
• 1 x Safety switch
• 1 x Flight control shell
• 1 x Buzzer
• 1 x 6pin line for 6pin
• Line 1 x 4Pin for 4Pin
• 1 x 3pin DuPont line
• 1 X USB Cable