SIM808 Module GSM GPRS GPS Development Board IPX SMA with GPS Antenna for Arduino Raspberry Pi Support 2G 3G 4G SIM Card
- Customizable: Yes
- Supply Voltage : 5 – 26V
- Condition : New
- Type : SIM808 GPS/GSM module
- Application : for Arduino / Raspberry Pi 3 B
- Country of origin : China
- Support SIM card : 2G 3G 4G
- Module Type : SIM808
-
- Quad-Band GSM 850/900/1800/1900MHz
- GPRS multi-slot class 12/10
- GPRS mobile station class B
- Compliant to GSM phase 2/2+
- Class 4 (2 W 850/900 MHz)
- Class 1 (1 W 800/1900MHz)
- Control via AT commands (3GPP TS 27.007,27.005 and SIM Com enhanced AT Commands)
- Supply voltage range:3.4v~4.4v
- Low power consumption
- GPS Receiver type
- 22tracking/66 acquisition-channel GPS L1 C/A code
- Sensitivity
- Tracking: -165 dBm
- Cold starts: -147 dBm
- Time-To-First-Fix
- Cold start: 30s (typ)
- Warm start: 28s (typ)
- Hot start: 1s (typ)
- Accuracy
- Horizontal Position: <2.5m CEP
- Default baud rate is 9600
Operation Description:
- Preparation:
- SIM808 SHIELD
- DC9V adapter
- USB-TTL module or other tools.
- PC software
- Hardware configurations
- Connect the USB-TTL to the UART interface
- insert the valid SIM card to the SIMCARD holder.
- Connect the GPS antenna and GSM antenna to the board
- Change the switch
- Press the POWKEY button for 2 second, the SIM808 module will work and the other 3 LEDs will light
Pins:
- Sleep: Set module into sleep mode
- GND: Ground
- PWRIN: 5-10V power supply
- PWRKEY: GND = power down
- TXD: TTL output
- RXD: TTP input.
Reviews
There are no reviews yet.